Showing posts with label Nintendo. Show all posts
Showing posts with label Nintendo. Show all posts

3/10/2018

Level 4-2

I've never had much interest in the speed running scene. However, the old you tube recommend one presentation by Summoning Salt about the classic Super Mario Bros. level 4-2.  I thought,"heck I remember that level, its how I got to level 8."  This video is amazing and changed the way I see record progression and speed running forever.  While I'm not ready to quit my day job and start speed running Mega Man 2, I will tell you that if you've ever warped to level 8 in Super Mario Bros. you need to watch this.

-kaokensho

8/07/2014

TMNT Party Wagon NES


Stumbled upon this artist and I am very impressed by his work.  You owe it to yourself to follow this one on facebook and check out his page.  Although those orange pieces my old wagon never did stay on for me.  : )  Here's what the artist Platinumfungi has to say about his latest creation! - kaokensho

Introducing the 'TMNT Party Wagon NES'! A fully functioning Nintendo built into a TMNT Turtle Van toy.

The first in the world  
A month's worth of work, a lot of R&D, countless hours of cutting, sanding, wiring, gluing, action figure modifying, and more went into this one-of-a-kind Nintendo Entertainment System.
The head lights and passenger compartment light up, the guns, radar, and armored windshield are moveable and removable, new 'glass' windows, new steering wheel, and more.
The power and audio/video cables plug into jacks mounted on the back of the van. The POWER and RESET buttons are located on top just in front of the TOP LOADING cart slot. The controller ports are built into the side door.
Leonardo is at the wheel while Michelangelo eats pizza and plays with his nunchucku sitting shotgun.
Matching custom painted controllers with unique overlays mimic the design and color palette of the van. The paint is all professional automotive base coat clear coat system. The clear coat was color sanded and buffed just like you would do on a show car!


Platinumfungi


3/10/2011

N64 Cart Analog Clock

Before I get back into full swing it's time for a warm up excerise.  As if by fate I was in need of a clock.  We start by removing the ugly sports label that came with this bargin bin monster and remove the security bit (see previous posts).  Then it is best to drill a hole from the front through the back.  Inside you'll find a small plastic nub that will need to be sanded down flat.  Get out the magical hot glue and secure the analog clock unit through the hole you drilled and bam!  Thats right add a little bam!  Or in this case some clock arms.

-kao

12/05/2010

SNES USB 2.0 4 Port Hub


I have applied the same procedure as described in the N64 Zelda SD Card Reader blog.  A Tarus USB 2.0 4-Port hub fits perfectly inside a SNES cart with out having to sand down the molding inside.  These hubs can be found for about five bucks on ebay. 
There are a plethora of inexpensive usb items with free shipping from all over the world.  For the actual game carts a used video game store is the way to go.  I just scored a bunch of Odyssey and Atari 2600 carts for about a buck a piece.   Perhaps an external hard drive project is due in the coming months! -kaokensho

11/12/2010

The NES Clock

It's NES cartridge clock time.  Now if you Google image NES Clock you'll get a plethora of hits.  Some made by individuals like myself and others for sale with a cartridge of your choice.  Today we'll go step by step and make two of our own.  The first step is to get a 3.8mm inverted hex bit (available on ebay) to  separate the cartridge pieces and remove the awesome 1980's ROM chip set.  This is where there are several variants in procedure and design...the backside.  Also alot of people seem afraid to drill a hole in the center of the cartrage (through the label) and instead elect to offset the clock to the left.  That will not work with particular setup.  Standard analog clocks are about 0.5" wide where as the inside of a NES cartridge is only 0.4."  The back of the clock unit also requires some space for a AA battery and a time adjustment wheel.  So somehow the backside of the cart has to be cut to allow the rear of the clock to be exposed.  I have seen many methods:  jigsaw (which I DO NOT recommend), dremel tool or some other insane risk of personal safety.  I do not plan on showing off the back of a wall clock so I took a different approach.  A round cutter...courtesy of my father-in-law.  A round cutter is mainly used to cut holes for door knobs.  In this case we'll use a 3" round cutter blade.  So we are going to line up the drill bit in the center of the middle screw hole on the back of the NES cart and round drill away!  Now on the front cart piece we will drill a .25" hole exactly the plastic part for the screw is and then sand it down so that the clock can sit fairly flush against the inside of the cartridge.  The center of the clock face or the axis should be approx 2.4" from the left, right and top sides.  Now hot glue the clock in there with enough room for the outer clock gear (the hour hand) to turn and presto you're half way there!  Use two of your security screws the re-attach the pre-drilled backside and add an optional wall hanger via hot glue.  And the rest is simple!  The kids love it almost as much as I do.  -kaokensho